Reliability and efficiency are key factors for power generation. ELWA develops
and manufactures specially designed components and systems for applications in power stations of all types. Photovoltaic, wind energy, gas turbines or diesel engines – process stability is essential.
ELWA can provide a wide range of products for any type of power plant. Injection nozzle cooling systems, cooling water preheaters, lubricating oil heaters or technical water supply units. Almost the complete peripheral equipment for operating fluids can be provided with products from ELWA.
ERH 4600 RF
The electric heaters of the series 4600 are our standard heaters for almost any application. Fluids: Oil, Emulsion / Power (max): 300 kW / Temp (max) : 150°C / Pressure (max): 10 bar
ROE 4600 RF (incl.controls)
ROE units including electrical preheater and control cabinet. Fluids: Oil, Emulsion / Power (max): 300 kW / Temperature (max): 150°C / Pressure (max): 10 bar
ERH 4600 WR (water/emulsion)
The electric heaters of the 4600 WR series are our standard heaters for almost any application if water or emulsion is the fluid to be heated. Fluids: Water, Emulsion / Power (max): 1.000 kW / Temp (max): 110 °C / Pressure (max): 10 bar
ERH 4600 H (oil/emulsion)
The electric heaters of the 4600 H series are our standard heaters for almost any application in high pressure systems. Fluids: Oil, Emulsion, Water / Power (max): 220 kW / Temperature (max): 150°C / Pressure (max): 30 bar
ERH 4700 compact (oil/emulsion)
The series 4700 compact heater features an unique compact design. Fluids: Oil, Water, Emulsion / Heating power (max): 39 kw / Temperature (max): 100°C / Pressure (max): 6 bar
Tank heater 800 WR / 400 WR
The series 800 heating inserts offer the same unique technical advantages as our standard heaters. With adaptable specific surface load and compact design, these heating inserts are perfectly suited to keep the temperature in tanks at the required level. Fluids: Oil, Emulsion / Power (max): 300 kW / Temperature (max): 150 °C / Pressure (max): 10 bar
Preheater KVE
KVE units ready-to-run units including electrical preheater, control cabinet and circulating pump. Fluids: water, emulsion / Power (max): 147 kW / Temp (max): 100°C / Pressure (max): 10 bar
Preheater KVES
KVES units are ready-to-run units including electrical preheater, control cabinet and circulating pump. These units are used to preheat the cooling water of large diesel engines or to serve as a heat source for sub-systems with heat exchangers. Fluid: water, emulsion / Power (max): 427 kW / Temp (max): 100°C / Pressure (max): 10 bar
Tank heater ERH 800 RF / 400 RF
The series 800 RF heating inserts feature design characteristics which make these units unrivalled on the market. The high variability of the design allows a perfect adaption to any process conditions. There is no better solution to heat up tanks.